Fast Forward Wheels offers Board Member Discounts

[FastForwardWheels]

Fast Forward Wheels offers Board Member Discounts!!!

I’m pleased to announce that Prowltalk has authorized Fast Forward Wheels to offer to its registered member’s service discounts***.

We will be offering 15-20% off all wheel work and 10% off all other services and finishing. (1-2 wheels 15%) (3-4 wheels 20%) Must be sent in all at the same time in order to qualify for these rates.

Custom triple plated wheels 17-19” front finishing (meaning only the fronts are highly polished, rears are given only a rough surface before plating) starts at $225.

Custom triple plated wheels 17-19” front and rear finishing (meaning we highly prepare and polish the front and rear areas before plating) show quality finish) starts at $275

Wheels 20-22” please add $75 more per each.

As an added bonus for club members we’ll also repair “minor” damage such as curb rash and wheels which are “slightly” our of round.

***It is your board host which will determine who qualifies as “a member” to prevent users registering only to obtain discounts and services.

Must have 50 or more posts


Please feel free to E-mail me directly at: eli@fastforwardwheels.com (eli@fastforwardwheels.com)

www.fastforwardwheels.com (http://www.fastforwardwheels.com)

http://www.pcars.us/albums/9046.jpg

[halicat]

That is awesome...

This is something badly needed, a great deal and superior work...

It will be great to get feedback from Toohip on his order.

great job Eli...

Thanks for all your efforts :tu:

[blackcat]

Good deal. Thanks!

[Snoman]

WOW!!!!!Now your talking!

[Kruisin Kat]

Eli,

Do you also offer aftermarket wheels? If so, what brands, styles can you get for the Prowler? Also, would you offer wheel/tire packages?

Thanks.

[Dreamcast18]

:nana2 :nana2 EXCELLENT!!! :nana2 :nana2

Kudos to David and Eli!

[MKAT]

Very nice addition. thanks to all!-MKAT:tu:

[Pepe]

That IS a great offer - Thanks Eli , gonna seriously consider it, even though it's a loooong way to ship !

[Dreamcast18]

Pepe: Sell that Turd Mobile and u can to ship it next day Fedex! Plus you won't be able to find a better chromer in 'Bama :mrgreen:

Actually to all ProwlTalk folks out there, if u want to save on shipping, PM me. You can ship it via Greyhound to me; I can pick it up from the nearby GH station and then drop it off @ Eli's. That should help out on the outbound shipping costs.


That IS a great offer - Thanks Eli , gonna seriously consider it, even though it's a loooong way to ship !

[TooHipCat]

:nana2 Thanks to ALL involved with bringing "Fast Forward Wheels" on board!!!:nana2

You know...it's GREAT that Eli is offering us this discount just for being an active Prowltalk member but all I really care about is that my rims are FINALLY (sitting out in sunny Southern California for OVER a month at another plating shop) in the hands of a true professional!

At least I think they are. Eli...you said your driver picked them up yesterday...correct?:confused: ;-)

Honestly guys. I know many can remember ALL the threads started on Prowler flaking rims.:oops:
I can't believe...thanks DC...that we finally have a competent plater that understands what we are looking for.

A completely polished "Show Chrome" rim. (Including the inside barrel)

"It will be great to get feedback from Toohip on his order." Jim...judging by the lengthy telephone conversations I have had with Eli so far...I know it will all be good!:tu:

Brian:mrgreen:

[TooHipCat]

That IS a great offer - Thanks Eli , gonna seriously consider it, even though it's a loooong way to ship !

C'mon Pepe...I shipped mine from NH!!!;-)

On that note...it cost me around $140.00 to do it. Reason it was so high was that I let the UPS Store package them up the right way...so they wouldn't get damaged. They encased the rims(s) in that hard foamboard then built boxes around them.
They recommended that bubblewrap NOT be used seeing as how it could get easily squashed by the weight of the rims.

Thanks for the Greyhound offer DC!:tu:

[FastForwardWheels]

:nana2 Thanks to ALL involved with bringing "Fast Forward Wheels" on board!!!:nana2

You know...it's GREAT that Eli is offering us this discount just for being an active Prowltalk member but all I really care about is that my rims are FINALLY (sitting out in sunny Southern California for OVER a month at another plating shop) in the hands of a true professional!

At least I think they are. Eli...you said your driver picked them up yesterday...correct?:confused: ;-)

Honestly guys. I know many can remember ALL the threads started on Prowler flaking rims.:oops:
I can't believe...thanks DC...that we finally have a competent plater that understands what we are looking for.

A completely polished "Show Chrome" rim. (Including the inside barrel)

"It will be great to get feedback from Toohip on his order." Jim...judging by the lengthy telephone conversations I have had with Eli so far...I know it will all be good!:tu:

Brian:mrgreen:


Brian,

Your wheels are now sitting in my shop, they are with the first group (checking to see why all those weights are on there), they will get some correction-love if needed before they go on to the next step.

By the way guys, I offer custom built 3-pc wheels. Because Prowlers are a little new to me I would need to have one at the shop in order to draw out details to determine the fitment. Custom work :tu:

I'll try to post as many photos through the process as I can but you got to understand how busy things can get for me back at the shop. I can't always stop things to take photos.... I'll certainly shot some if I get the opportunity.

Take care, don't forget to thank your board host!

-Eli

[FastForwardWheels]

C'mon Pepe...I shipped mine from NH!!!;-)

On that note...it cost me around $140.00 to do it. Reason it was so high was that I let the UPS Store package them up the right way...so they wouldn't get damaged. They encased the rims(s) in that hard foamboard then built boxes around them.
They recommended that bubblewrap NOT be used seeing as how it could get easily squashed by the weight of the rims.

Thanks for the Greyhound offer DC!:tu:

Too bad CA Chrome didn't hand over those boxes, they sounded pretty good when you talked about them. My driver was handed the two raw wheels :rolleyes:

[TooHipCat]

Too bad CA Chrome didn't hand over those boxes, they sounded pretty good when you talked about them. My driver was handed the two raw wheels :rolleyes:

Heck...at least they didn't heave them out of their wharehouse and say..."Here you go!" :shock: (as they came crashing down onto the asphalt)




"Take care, don't forget to thank your board host!"

You're right Eli...Thank You David!!!:tu: :bows

[TooHipCat]

Brian,

Your wheels are now sitting in my shop, they are with the first group (checking to see why all those weights are on there), they will get some correction-love if needed before they go on to the next step.



I can't thank you enough Eli!!!:tu: :bows


Brian,

By the way guys, I offer custom built 3-pc wheels. Because Prowlers are a little new to me I would need to have one at the shop in order to draw out details to determine the fitment. Custom work :tu:



I am also interested to see just what kind of rims you can come up with that will fit the Prowler. A few people have replaced the Prowlers original rim but I guess you have to use spacers due to the rims odd spacing on the backside?:confused: I don't know if the same problem is encountered with the front rims also.

I may have this wrong so please correct me guys!;-)

I'll try to post as many photos through the process as I can but you got to understand how busy things can get for me back at the shop. I can't always stop things to take photos.... I'll certainly shot some if I get the opportunity.



That's fully understandable if you can't take pics of the rims progress each step of the way.

It's the end result is all that matters!!!:tu:

Thanks once again to Eli and everyone involved with bringing him and his great company..."Fast Forward Wheels" to Prowltalk.

Brian:mrgreen:

[halicat]

I was wondering if Eli can offer a chrome or custom finish on our brake calipers and other front end parts. a black chrome over nickel would look awesome on Hellkat...

Gary E. does a exchange on front calipers in chrome for $350/set.

Is this something your interested in Eli ?

if so.. give us some details.

Jim

[FastForwardWheels]

I can't thank you enough Eli!!!:tu: :bows

No Problem, it's what I do. . . .


I am also interested to see just what kind of rims you can come up with that will fit the Prowler. A few people have replaced the Prowlers original rim but I guess you have to use spacers due to the rims odd spacing on the backside?:confused: I don't know if the same problem is encountered with the front rims also.

I may have this wrong so please correct me guys!;-)

If you're fine using the same back-spacing spects on the OEM wheels I'm refinishing I can certainly take down the spects. Do you have any particular patern in mind? I'll see what I can do... Mind you more custom built wheels have a starting price range of around $3500 per set.

That's fully understandable if you can't take pics of the rims progress each step of the way.



It's the end result is all that matters!!!:tu:

Thanks once again to Eli and everyone involved with bringing him and his great company..."Fast Forward Wheels" to Prowltalk.

Brian:mrgreen:

Hope this answers all....

-Eli

[FastForwardWheels]

I was wondering if Eli can offer a chrome or custom finish on our brake calipers and other front end parts. a black chrome over nickel would look awesome on Hellkat...

Gary E. does a exchange on front calipers in chrome for $350/set.

Is this something your interested in Eli ?

if so.. give us some details.

Jim

We have a finish where-by we can change original chrome finishes into the look of Black-Chrome or Black-Nickle. This is the Diamond Over-Lay process. Other than that we offer caliper refinishing.... :tu:

-Eli

[Jim S]

Eli, I have a question for you. On the face side of the rim, at the center where the cover goes, can you blend in the indent area and polish the entire area where the lug nuts go? For those that choose to throw away the cheap plastic crap DC put on, and replaced them with spinners, it would be nice to have this area polished.

Like everyone else, welcome to the board and thanks for the interest in fixing the problem wheels.

And thanks also to Dreamcast for the legwork on this. :tu:

[FastForwardWheels]

Eli, I have a question for you. On the face side of the rim, at the center where the cover goes, can you blend in the indent area and polish the entire area where the lug nuts go? For those that choose to throw away the cheap plastic crap DC put on, and replaced them with spinners, it would be nice to have this area polished.

Like everyone else, welcome to the board and thanks for the interest in fixing the problem wheels.

And thanks also to Dreamcast for the legwork on this. :tu:

Hi there Jim

Thanks for the welcome,

I can pretty much do anything wheel related within reason.....

THIS REQUEST FALLS WITHIN REASON! Sure I can do this for you, there will be some added cost for time of course. I base most the work I bill out by two things TIME & MATERIALS. I'd estimate that it would be an extra $30 per each if I'm turning the whole wheel..... :tu:

-Eli

[TooHipCat]

Those are definitely my rims Eli.:oops: Thanks for taking the BEFORE pics.

I just can't wait to see the after!

Have you guys checked them out to see if they are out of round yet? Just curious.

Too early to tell what the turn around time will be on the rims???

Believe me when I say...PLEASE...take as long as you need to get them looking nice.:tu:

Thanks Eli!

Brian;-)

[FastForwardWheels]

Those are definitely my rims Eli.:oops: Thanks for taking the BEFORE pics.

I just can't wait to see the after!

Have you guys checked them out to see if they are out of round yet? Just curious.

Too early to tell what the turn around time will be on the rims???

Believe me when I say...PLEASE...take as long as you need to get them looking nice.:tu:

Thanks Eli!

Brian;-)

Actually the wheels didn't seem to be out of round... This is what we check for the first time around, when the chrome is removed then we'll check the balance... We can certainly see what's going on there, I think it's better to do it this way since the chome may effect the results..

-Eli

[TooHipCat]

Actually the wheels didn't seem to be out of round




In all honesty...they didn't feel like they were when they were on the car. I am just going by what the last shop told me.:rolleyes:

Thanks again!

Brian:mrgreen:

[FastForwardWheels]

In all honesty...they didn't feel like they were when they were on the car. I am just going by what the last shop told me.:rolleyes:

Thanks again!

Brian:mrgreen:

Understood,

We're still going to check them once all the chrome is removed. Hopefully we'll get a better idea.....

=Eli

[Krzy Kat]

WOW - that's good news. The stock rims so many like them, but the quality was the issue. Now to get them with the show quality we want ... NICE OPTION. Hey - if he chromes the calipers Jim, maybe even the whole front end, upper/lower arms too ... getting those in that black diamond chrome .. might be sweet for hellkat.

[halicat]

:tu:
That was what I was thinking.... leave the calipers regular chrome and gun metal the rest....sweeet !....

Sounds like a project for next winter, If i recover by then...lol

or get some lottery money...8-)

[Dreamcast18]

Jim S: You're welcome! Am glad that we now have someone local who can fix the crappy wheels on our Prowlers! And at very resonable club discounted prices if I might add! :tu:

Hope to see you @ the 10th Anniv Prowler Photobook Launch Event! (http://www.prowltalk.com/vbforums/showthread.php?t=2307)

We should get Eli to drop-by so that he can answer any wheels questions :mrgreen:


And thanks also to Dreamcast for the legwork on this. :tu:

[TooHipCat]

We should get Eli to drop-by so that he can answer any wheels questions :mrgreen:

As long as he brings along his ride in addition to maybe some of his other Porsche buddies!:tu:

[FastForwardWheels]

As long as he brings along his ride in addition to maybe some of his other Porsche buddies!:tu:


How many do you expect? Last meet we had was a 35-Porsche turn out... Maybe a little too big for a quick meet. I'll bring the horse out of the stable :tu:, I'm only minutes away from Pasadena...

Keep me posted, I might bring out a couple of samples...

-Eli

[TooHipCat]

Keep me posted, I might bring out a couple of samples...

-Eli


I wish I had the time to fly out!:cry:

All that matters is that you guys have a good time!:tu:

[Dreamcast18]

Well, today I dropped off my wheels @ FFW:

1. Thanks to 24KInMotion for loaning me 4 wheels + tires!

2. Had a good chat with Eli, am still on the fence with regards to the nickel chroming. As TooHip said, if I do it, the Black Kat stays for good 8-)

3. Thanks to David/Eli for working out a discount for PTalk members!

4. For folks who are looking for billet caps/spinners from Eli, you might want to speak up! Maybe a group-buy might get something going? I really want to get away from our plastic wheel caps, so I'm in for 2 sets! If we can get enough commitment, we might be able to get something going with Eli to make it worth his time

5. I was pretty impressed when Eli mentioned he knew the guy who worked on the Prowler concept wheels which had the ridges. Anyone wants to get a set of custom Prowler concept wheels made? 8-)

Sample pics of the concept wheels:

http://www.prowltalk.com/gallery/data/500/conceptwheel.jpg

http://www.prowltalk.com/gallery/data/500/medium/conceptwheel02.jpg

[Krzy Kat]

Look at the size of the headrest on the concept pic.

[TooHipCat]

I was pretty impressed when Eli mentioned he knew the guy who worked on the Prowler concept wheels which had the ridges. Anyone wants to get a set of custom Prowler concept wheels made? 8-)

Sample pics of the concept wheels:

http://www.prowltalk.com/gallery/data/500/conceptwheel.jpg

:?: Will they be painted or chromed aluminum rims?

:?: Will he keep the original design? If so...we will have to get the original painted plastic matching center caps.

I'm always open to new ideas.

http://forums.detnews.com/dn/joyrides/2002/tomgale/93prowler.jpg

SWEET!!!:tu:

[FastForwardWheels]

TooHipCat: First off let me tell you that your wheels "were" almost done today.... Problem is that I wasn't 100% happy with the finial product and therefore I made the call to replate them.

I know that you won't mind waiting the extra time. I just know that a week is a small price to pay for a perfect set. There was some showing of the rear surface. The fronts were 100% perfect but it was the inner side that made me have a double take... I'll keep you posted. I have photos, just no time to upload, size, post etc.

Guys the concept wheels are something I'll need to look into as to the production etc. If you guys are interested in these just let me know so I don't spin my wheels for kicks.....

Also regarding the billet center caps I can see what we can work out on a group-buy, but I will need to know how much interest there is....

Dreamcast18, Thanks for the business.... :tu: I'll get started on your set come Monday.... I'll call you once they are ready so you can tell me if the Diamond finish is something that you may be interested in....

I leave you with a photo of my wheels in Black Diamond overlay centers..

http://www.pcars.us/albums/8924.jpg

-Eli

[TooHipCat]

TooHipCat: First off let me tell you that your wheels "were" almost done today.... Problem is that I wasn't 100% happy with the finial product and therefore I made the call to replate them.

I know that you won't mind waiting the extra time. I just know that a week is a small price to pay for a perfect set. There was some showing of the rear surface. The fronts were 100% perfect but it was the inner side that made me have a double take... I'll keep you posted. I have photos, just no time to upload, size, post etc.






Your kidding me Eli :shock: ...man...you guys are fast!!!

As I said before...I would rather wait a little longer if it means a better finished product.:tu:

That set of rims may not want to come back home. They've been soaking up the California sun for about a month and a half now.:lol:

As we both know Eli...you have only had them for a couple of weeks.

Thanks again for the update my friend.:tu:

Brian:mrgreen:



I leave you with a photo of my wheels in Black Diamond overlay centers..

http://www.pcars.us/albums/8924.jpg

-Eli

I have seen this cool pic before. Problem is...it's hard to make out the rims cuz you're going so fast!!!;-)

[FastForwardWheels]

Your kidding me Eli :shock: ...man...you guys are fast!!!

As I said before...I would rather wait a little longer if it means a better finished product.:tu:

That set of rims may not want to come back home. They've been soaking up the California sun for about a month and a half now.:lol:

As we both know Eli...you have only had them for a couple of weeks.

Thanks again for the update my friend.:tu:

Brian:mrgreen:




I have seen this cool pic before. Problem is...it's hard to make out the rims cuz you're going so fast!!!;-)


No problem, I just want to make certain you're 100% happy with these wheels before I ship them out to you.... Wheel photo was to show how the Black Diamond looks while in motion.... Follow this link to see Black Diamond Overlay Photos:

http://www.fastforwardwheels.com/before_after.html

[TooHipCat]

You guys have to be one of...if not the best, rim repair, straightening and rechroming facility in the country!!!

I am truly impressed Eli!!!:-D

Not only can the Prowltalk people see first hand your expertise but I plan on letting ALL my motorhead buddies know about...

Fast Forward Wheels!!! :tu:

[FastForwardWheels]

You guys have to be one of...if not the best, rim repair, straightening and rechroming facility in the country!!!

I am truly impressed Eli!!!:-D

Not only can the Prowltalk people see first hand your expertise but I plan on letting ALL my motorhead buddies know about...

Fast Forward Wheels!!! :tu:

Here is a couple of photos of what I was talking about....

As you can see I wrote and marked the wheels to go through again....

[TooHipCat]

Yes Eli...I can see the marks on the inside barrel that you pointed out.

Do you think it was pitting? Just curious.

The pitting for that matter...how bad was it? Did you have to fill in any areas?

I'll tell you what...so far I am very pleased with the end result.:tu: Thanks again for ensuring that they look so good even if it takes a little longer.

Please do me a favor before I forget. When the rims are sent back...please include an ample supply of your business cards. I definitely have to let my friends know what you guys are all about.

Have a good weekend Eli and thanks again!!!

Brian:mrgreen:

[FastForwardWheels]

Yes Eli...I can see the marks on the inside barrel that you pointed out.

Do you think it was pitting? Just curious.

The pitting for that matter...how bad was it? Did you have to fill in any areas?

I'll tell you what...so far I am very pleased with the end result.:tu: Thanks again for ensuring that they look so good even if it takes a little longer.

Please do me a favor before I forget. When the rims are sent back...please include an ample supply of your business cards. I definitely have to let my friends know what you guys are all about.

Have a good weekend Eli and thanks again!!!

Brian:mrgreen:

There were areas which needed attention, we try to get every single inch of the wheels right. This looks like it was from the plating not from the actual wheel....

:tu: I'll keep you posted,

-Eli

[TooHipCat]

There were areas which needed attention, we try to get every single inch of the wheels right. This looks like it was from the plating not from the actual wheel....

:tu: I'll keep you posted,

-Eli

You guys are true professionals!!!:tu: :bows

[Snoman]

WOW These guys are the tops!!!!!!!!!!!!!!!!
:tu: :tu: :tu:

Toohip we will all need raybans in Tulsa!!!!:cool: :cool: :cool:

[Dreamcast18]

It feels good that I'm not a lone guinea pig...am in good company with TooHip! Can't wait for some real show chrome! :tu: :tu:

[TooHipCat]

It feels good that I'm not a lone guinea pig...am in good company with TooHip! Can't wait for some real show chrome! :tu: :tu:


It's funny...I never once felt like a Guinea Pig after talking with Eli.

I'll say once again...for him to come out and make the comment..."We do rims that other places do not want to touch". I mean if that doesn't instill a level of confidence in you...nothing will.

I have a funny feeling that my rear rims will make my front chromes look bad. I better start polishing!!!:lol:

I may just have to send out my front rims to Eli at the ends of this cruising season so that both sets will match.

Tom,
I think I could chrome my whole kat and it wouldn't look as good as your "House of Kolor" Candy Red on your kat!!!:tu:

http://i125.photobucket.com/albums/p59/TooHipCat/Snomantrailer07-11-06.jpg

[Snoman]

:tu:

:cool: :cool: :cool:

[Kruisin Kat]

Eli, Do you chrome anything other than wheels? Curious about chroming my hitch (receiver) that bolts to the cat. I won't be doing the hitch until next winter.

Thanks.

[FastForwardWheels]

Eli, Do you chrome anything other than wheels? Curious about chroming my hitch (receiver) that bolts to the cat. I won't be doing the hitch until next winter.

Thanks.

We don't chrome anything over 24" when it comes to wheels but small items like that we would have no problem.....

Hoping every thing goes well this next week when the AFTER shots will be available to post.

Cheers,

-Eli

[Kruisin Kat]

Eli, I ran out to the garage to measure the receiver. It's approx. 32" long and 12" high and 6" deep overall. What do you think?

Maybe when DC picks up his wheels you could look at his receiver thats on his Prowler to get an idea of its size and shape.

Thanks for the fast reply!!!!!

[TooHipCat]

Hoping every thing goes well this next week when the AFTER shots will be available to post.

:tu:

Thank you Eli!!!:bows


Paul,
If Eli can't help you out...you can always wait to hear back from me. I am getting a small piece plastic chromed out in of all places...TN...your new home!!!:cry: Go figure.

It's the place that Pepe recommended!:tu:

Brian:mrgreen:

[FastForwardWheels]

Eli, I ran out to the garage to measure the receiver. It's approx. 32" long and 12" high and 6" deep overall. What do you think?

Maybe when DC picks up his wheels you could look at his receiver thats on his Prowler to get an idea of its size and shape.

Thanks for the fast reply!!!!!

No problem, I'll take a look at it the next time I see one of the guys roll up. Super-Busy week sorry for the late replies....

-Eli

[TooHipCat]

Super-Busy week sorry for the late replies....

-Eli

We all know what it's like Eli.

I think the only reason I didn't ask you about the piece I needed chromed...is because it's plastic. I didn't think you plastic chromed.

Can't wait to see what you've done to my rims!!!:tu:

Also...can't wait to send you out my front set...next.

Brian:mrgreen:

[FastForwardWheels]

We all know what it's like Eli.

I think the only reason I didn't ask you about the piece I needed chromed...is because it's plastic. I didn't think you plastic chromed.

Can't wait to see what you've done to my rims!!!:tu:

Also...can't wait to send you out my front set...next.

Brian:mrgreen:

Brian,

I was hoping to keep you up with more photos but I had a family emergency last week so I was away from the shop 1/2 week. I'm getting back to the shop now 1/2 day today and 1/2 day tomorrow but the work goes on. Just so you know your wheels should be ready to ship out by Friday. I'll sure post more photos, once again guys sorry for the delay but I had a bad day last week when my ex-wife's boyfriend tried to attack me during my daughter's open house :( . . . :x

Had to take time out to take legal action :tu:

Once again, I'll post more photos when I get a moment. . .

-Eli

[TooHipCat]

Not a problem Eli!

I'm sure they'll be worth the wait!:tu:

I'm sorry you had some problems with the BF.:x

Hope you let him have it!!!http://i96.photobucket.com/albums/l168/RueDor/animated%20gifs/smileys/th_nutkick.gif

:rll:

[FastForwardWheels]

Not a problem Eli!

I'm sure they'll be worth the wait!:tu:

I'm sorry you had some problems with the BF.:x

Hope you let him have it!!!http://i96.photobucket.com/albums/l168/RueDor/animated%20gifs/smileys/th_nutkick.gif

:rll:

Yah, very funny....... :roll:

Your wheels are in plating right now so the target date is Friday! :tu:

I'll keep you posted and will more than likely snap and post photos of the work.

-Eli

[TooHipCat]

Yah, very funny....... :roll:




I hope you didn't take my comment to heart. I was just trying to make lite of the situation. Please accept my sincere apology if I offended you in any way.

Brian:mrgreen:

[FastForwardWheels]

I hope you didn't take my comment to heart. I was just trying to make lite of the situation. Please accept my sincere apology if I offended you in any way.

Brian:mrgreen:

Brian, not at all, I didn't take your comment in offence in any manner. Car guys are like family. . . Take back that silly apology, it wasn't needed.

:beer:

-Eil

[TooHipCat]

Car guys are like family. . . Take back that silly apology, it wasn't needed.

:beer:

-Eil

I wish ALL felt that way Eli!:roll: I have inadvertently offended a few over the years with my sometimes sarcastic sense of humor.

I hope things are going better with you!!!

Brian:mrgreen:

[FastForwardWheels]

GUYS, after a rough week (chrome tank broke on Thur) we actually should have both sets completed by Tues or Wed of this week!!!!

I have some photos which I haven't uploaded yet of the wheels in copper-state.

Once again sorry for putting up with me on this project, it will be well worth it..... :tu:

-Eli

[TooHipCat]

GUYS, after a rough week (chrome tank broke on Thur) we actually should have both sets completed by Tues or Wed of this week!!!!

I have some photos which I haven't uploaded yet of the wheels in copper-state.

Once again sorry for putting up with me on this project, it will be well worth it..... :tu:

-Eli

I'm sure it will be worth the wait Eli...this is why you don't hear me complaining.;-)
http://i151.photobucket.com/albums/s123/MICHELE083/good7.gif

Please check your PM's!

Brian:mrgreen:

[FastForwardWheels]

Well there fellas,

I thought I would have something special done for you nice Prowler guys. You have ALL been very warm in your welcome so I in turn have had a page made in honor of the Prowler guys.

Here is the first set of wheels pumped out for your Prowler-Talk guys. Hope to see more to come. I hope this will answer lots of questions as to the quality of the finish we put out. :tu:

http://www.fastforwardwheels.com/prowler.html

Enjoy! :burnout

Too Hip Cat, PM sent.....

-Eli

By the way, I'd like to have a photo from someone who's wheels I've done to use as an Icon for this page. . . . Thanks!

SITE ADMIN: PLEASE LET DRAW ME THAT LINK & ADD THE SPONSOR ICON, NOTE I'VE ALSO DRAWN A LINK FROM THE NEW PAGE TO THIS NICE SITE OF YOURS :tu:

[Dreamcast18]

Sweetness! :tu:

Can't wait for mine :beer:

[Snoman]

WOW :tu: :tu: :tu:

[halicat]

That is outstanding !

Eli steps up to the plate and hits a home run !!!:tu:

[FastForwardWheels]

Sweetness! :tu:

Can't wait for mine :beer:
Your wheels are next in line so I would say give me an other couple of days and you'll be riding pretty..... :tu:

-Eli

http://www.fastforwardwheels.com/files/set_1SANY2272.jpg

[TooHipCat]

By the way, I'd like to have a photo from someone who's wheels I've done to use as an Icon for this page.


You obviously will have the final say Eli cuz it's your webpage but I feel that Dreamcast should have this honor!!!:tu:

If it wasn't for him...my rims would have been shipped back to me from that guy up by Magic Mountain...UNDONE!!!

Just at EXACTLY the right time...Skankat was asking me a few questions regarding my plating job. That's when she told me that Dreamcast found this great place in LA called "Fast Forward Wheels".
The rest as they say...is history.

OMG Eli...I'm speechless!!!:shock: :tu:

I cannot believe how good they came out!!!

I will give you a call this morning to make arrangements for payment and shipping.

Please once again...include a large supply of business cards in either one of the boxes for the rims. I have to tell ALL of my motor head buddies about you guys!!!

Brian:mrgreen:

[FastForwardWheels]

You obviously will have the final say Eli cuz it's your webpage but I feel that Dreamcast should have this honor!!!:tu:

If it wasn't for him...my rims would have been shipped back to me from that guy up by Magic Mountain...UNDONE!!!

Just at EXACTLY the right time...Skankat was asking me a few questions regarding my plating job. That's when she told me that Dreamcast found this great place in LA called "Fast Forward Wheels".
The rest as they say...is history.

OMG Eli...I'm speechless!!!:shock: :tu:

I cannot believe how good they came out!!!

I will give you a call this morning to make arrangements for payment and shipping.

Please once again...include a large supply of business cards in either one of the boxes for the rims. I have to tell ALL of my motor head buddies about you guys!!!

Brian:mrgreen:

Thanks Brian, you know the true test to how you feel about the wheels can only come once they are mounted on the car. I'll be happy to host a few shots from all the Prowler customers if you provide them to me....

-Eli

[TooHipCat]

ABSOLUTELY!!!

I can send you all the pics you want!

I just sent you a PM my friend.

Brian:mrgreen:

[FastForwardWheels]

ABSOLUTELY!!!

I can send you all the pics you want!

I just sent you a PM my friend.

Brian:mrgreen:

Replied back.... :burnout

-Eli

[TooHipCat]

Thanks Brian, you know the true test to how you feel about the wheels can only come once they are mounted on the car.


I personally feel that your rechroming job will make the original front rims plated by American Racing...look like crap!:shock: :vomit:

I would like to ship the front rims out to you this Fall if it's OK with you. They are only 17" in size. A little easier to work with I'm sure.

Brian:mrgreen:

[halicat]

I don't know if this can be a help to anyone but I have a set of nasty peelers that I replaced with Martin Brothers wheels. There was a guy with an old truck that was interested in buying them but that deal fell through when he crashed the truck....

I would sell them very cheap if it could help out one of our members... shipping would probably cost around $40 / wheel.

[TooHipCat]

I just sent you a PM my friend.

Brian:mrgreen:

Another PM Eli!

[TooHipCat]

I don't know if this can be a help to anyone but I have a set of nasty peelers that I replaced with Martin Brothers wheels. There was a guy with an old truck that was interested in buying them but that deal fell through when he crashed the truck....

I would sell them very cheap if it could help out one of our members... shipping would probably cost around $40 / wheel.


Jim,
We'll see if nobody else needs them. If they don't...I'd buy they off you just as long as they haven't been curbed too many times.:shock: :lol:

I'd like to have a spare set lying around. I could eventually send them to Eli!!!:banana:

Your a good friend Jimbo!

Brian ;-)

[halicat]

Hey Brian,

Never been curbed... just peeling...

I couldn't find a better home for them than with TooHipCat....

you got first shot old friend....

:tu:

[FastForwardWheels]

I don't know if this can be a help to anyone but I have a set of nasty peelers that I replaced with Martin Brothers wheels. There was a guy with an old truck that was interested in buying them but that deal fell through when he crashed the truck....

I would sell them very cheap if it could help out one of our members... shipping would probably cost around $40 / wheel.

How cheap? Maybe I can have a set for "swap" so you guys wouldn't have to wait soo long.... :rolleyes:

-Eli

[halicat]

Hey Eli,

I'd like to get $350 for all 4 plus shipping...

That way you would always have a set ready to ship...

[TooHipCat]

How cheap? Maybe I can have a set for "swap" so you guys wouldn't have to wait soo long.... :rolleyes:

-Eli

Hmmm...keep a set in stock...that a good idea too!

It's up to Jim of course.

We havn't even talked a price yet.

Eli...check your PM's again!:rolleyes: Thanks!!!

By the way Eli...I see they've been worth the wait!:tu:

[TooHipCat]

[quote=halicat;19331]Hey Eli,

I'd like to get $350 for all 4 plus shipping...

That way you would always have a set ready to ship...[/quote

If Eli declines...which he won't...I'll still take them!

Hell of a price Jim!!!:tu:

[halicat]

sounds great...

we are all in this together....:tu:

[TooHipCat]

Damn...this board is HOT today!!!:rll:

[Mr.Mcgoo]

I have a set of front's and just need a set for the rear and than I would have to decide chrome or black chrome on silver car? Or just bye custom rims, Hmmm:?:

[FastForwardWheels]

Hey Eli,

I'd like to get $350 for all 4 plus shipping...

That way you would always have a set ready to ship...

Sounds like a resonable amount...

E-mail me the total with shipping to 91803 (California)

eli@fastforwardwheels.com

Great, now I'll have a set ready to swap out at any given moment! :tu:

-Eli

[Dreamcast18]

Eli: Sweet deal. U're gonna get lodsa folks lining up for that in SoCal! Don't 4get to attend the ProwlTalk PhotoBook Launch event! :tu: :tu: :tu:


Sounds like a resonable amount...

E-mail me the total with shipping to 91803 (California)

eli@fastforwardwheels.com

Great, now I'll have a set ready to swap out at any given moment! :tu:

-Eli

[Snoman]

Sounds like a resonable amount...

E-mail me the total with shipping to 91803 (California)

eli@fastforwardwheels.com

Great, now I'll have a set ready to swap out at any given moment! :tu:

-Eli

Now this is one hell of a plan!!!!!!!

JIM,,,Sweet price on the wheels!!!!

Eli I will be in line for replacements in the fall,,,,will let you know,,,,This damn car is more expensive than the wife!!!!!LOL shhhhh dont tell her that!!:tu: :tu: :tu:

[halicat]

I will take the wheels to the tire shop on monday to have the tires removed bring them back to work, package them up, take them to the post office and get a shipping charge. They will go insured in four boxes.

I'll get back to you by monday night with the costs and we can work out the details from there.

:tu:

[Dreamcast18]

Two very generous acts in a week from Jimbo! :tu: :tu: :bows :bows

I will take the wheels to the tire shop on monday to have the tires removed bring them back to work, package them up, take them to the post office and get a shipping charge. They will go insured in four boxes.

I'll get back to you by monday night with the costs and we can work out the details from there.

:tu:

[FastForwardWheels]

I will take the wheels to the tire shop on monday to have the tires removed bring them back to work, package them up, take them to the post office and get a shipping charge. They will go insured in four boxes.

I'll get back to you by monday night with the costs and we can work out the details from there.

:tu:

Sounds like a plan..... Hope this will help so others will not have as much down time as wheels finished like these are around 3-weeks. Normally 2-weeks but since we are buffing the copper we need more time. :tu:

-Eli

Eli: Sweet deal. U're gonna get lodsa folks lining up for that in SoCal! Don't 4get to attend the ProwlTalk PhotoBook Launch event! :tu: :tu: :tu:

When is that again?

-Eli

[DanMan]

I inadvertantly overlooked this thread for the past couple of weeks. Man! Have I missed some developments!

Eli! Beautiful job on the wheels! They look better than new!

Brian, you going to Carlisle this year? I wanna check these things out!

[TooHipCat]

Brian, you going to Carlisle this year? I wanna check these things out!


Dan,
I'm sorry but this is the one year that I won't be going.:cry:
This is due to Tulsa and Woodward.

I will post many pics of just how they look on the kat.

It takes a lot for me to recommend someone...especially in my profession...but after only a few telephone conversations with Eli...I've come to the conclusion that he is a no nonsense guy that stands behind his work!!!:tu:

As I said before...my front rims will probably go out to Eli in the Fall. Gotta start saving my pennies.

Brian:mrgreen:

[FastForwardWheels]

That is outstanding !

Eli steps up to the plate and hits a home run !!!:tu:

We worked a 1/2 day but I was only there in the AM and had to make a couple of drops an hour away so I wasn't at the shop during quiting time...

The shop super called me late in the day to tell me your wheels were done! They'll be ready to ride come Monday......

Sorry we're not open Sundays...

-Eli

[TooHipCat]

Sorry we're not open Sundays...

-Eli


...and I feel you shouldn't be!!!:tu:

What ever happened to Sunday being the day of rest...you know...the Sabbath Day!

Brian:mrgreen:

[FastForwardWheels]

Chwee.... Your wheels are ready now.... :tu:

-Eli

Brian, Your wheels have shipped...... :tu:

-Eli

[halicat]

Hey Eli,

I couldn't get the shipping charges today, I had to drop off the Kat at the paint shop to prep it for the show and had no transportation today that could carry the wheels to the tire shop. I hope to get this done tomorrow if I make it to work, but I'm very sick with a cold and may have to call in sick to try and recover.

Regardless of how I feel Wednesday I will get it done and post my findings. I will be gone from Thursday until Sunday to the show....sorry for the delay...

Jim

[TooHipCat]

Chwee.... Your wheels are ready now.... :tu:

-Eli

Brian, Your wheels have shipped...... :tu:

-Eli


:banana: :banana: :banana:

Thanks again Eli for everything!!!:tu: :bows

I have already started telling ALL my motor head buddies about you guys at "Fast Forward Wheels" !!!

Brian:mrgreen:

[TooHipCat]

Regardless of how I feel Wednesday I will get it done and post my findings. I will be gone from Thursday until Sunday to the show....sorry for the delay...



I hope you're feeling better Jim!

Please post pics of "Hellcat" at the show when you get a chance.

Brian;-)

[halicat]

Thanks Brian..

I'll get lots of pictures:tu:

[FastForwardWheels]

:banana: :banana: :banana:

Thanks again Eli for everything!!!:tu: :bows

I have already started telling ALL my motor head buddies about you guys at "Fast Forward Wheels" !!!

Brian:mrgreen:

You're so welcome! Don't forget those photos.... :tu:

DON'T FORGET TO TAKE IS SOMEWHERE WHERE THEY MOUNT THE WHEELS WITH OUTSIDE CLAMPS so you don't damage the inside of the wheels.

-Eli

Hey Eli,

I couldn't get the shipping charges today, I had to drop off the Kat at the paint shop to prep it for the show and had no transportation today that could carry the wheels to the tire shop. I hope to get this done tomorrow if I make it to work, but I'm very sick with a cold and may have to call in sick to try and recover.

Regardless of how I feel Wednesday I will get it done and post my findings. I will be gone from Thursday until Sunday to the show....sorry for the delay...

Jim

Jim, Don't worry about it, just take care of yourself first. When you are ready I'll send the funds to complete the transaction

Hope you get well soon. :beer:

-Eli

[halicat]

Thanks Eli,

I have been taking these wheels to the same place everytime.. the are very carefull and have the correct machine....These wheels will be a challenge for your tallents... the inner barrels have peeled quite bad...

looking at your site, i'm sure you can bring them back to better than new...:tu:

[FastForwardWheels]

Thanks Eli,

I have been taking these wheels to the same place everytime.. the are very carefull and have the correct machine....These wheels will be a challenge for your tallents... the inner barrels have peeled quite bad...

looking at your site, i'm sure you can bring them back to better than new...:tu:

Better than new is correct, the chrome plate that was used appeared to be ONLY chome..... To do it right you must TRIPLE-Plate.... :tu:

-Eli

[Krzy Kat]

Eli, on a side note, can you comment on the original wheel platings?

Why do so many (most) prowler wheels have this issue?

Also - if one lives near the ocean, are there extra steps one can do to try to minimize the effects of waterfront living? Does a carnuba wax or zoop for example protect the metal?

Thanks - and your wheels look superb. I think you'll get more business from Prowlers than you'd guess.

[FastForwardWheels]

Eli, on a side note, can you comment on the original wheel platings?

Why do so many (most) prowler wheels have this issue?

Also - if one lives near the ocean, are there extra steps one can do to try to minimize the effects of waterfront living? Does a carnuba wax or zoop for example protect the metal?

Thanks - and your wheels look superb. I think you'll get more business from Prowlers than you'd guess.

Like I mentioned it appears as though the wheels are only plated from the dealer... Meaning that they are not triple plated, triple plating does a couple of things, one it helps bond the plating work to the surface, two it also allows for smoother surfaces when the chrome is applied and three it creates a thicker plating.... As all plating goes, you'll need to take care of them, wipe them down after ANY rain driving. Don't let water sit in the back-area... This will damage any plated wheel over time.

-Eli

[TooHipCat]

DON'T FORGET TO TAKE IS SOMEWHERE WHERE THEY MOUNT THE WHEELS WITH OUTSIDE CLAMPS so you don't damage the inside of the wheels.



The guys that took the old tires off prior to sending the rims out to CA are pros. I guess that's why they're called Rim-Pro.

Eli...do you recommend that they use the stick on wheel weights on the inside of the barrels when they go to balance them?:?:

Do you think any good tire and rim shop would have them in stock or should I order them through Chrysler?:?:

Brian:mrgreen:

[FastForwardWheels]

The guys that took the old tires off prior to sending the rims out to CA are pros. I guess that's why they're called Rim-Pro.

Eli...do you recommend that they use the stick on wheel weights on the inside of the barrels when they go to balance them?:?:

Do you think any good tire and rim shop would have them in stock or should I order them through Chrysler?:?:

Brian:mrgreen:

The stick on weights are just fine..... I'd prefer them myself... If they ever change your tires though remove them yourself or the tire guy will slide a metal puddy knife under them to lift them up... :cry: If you remove them yourself with a plastic puddy knife and some goof-off you'll save your chrome....

-Eli

[TooHipCat]

The stick on weights are just fine..... I'd prefer them myself... If they ever change your tires though remove them yourself or the tire guy will slide a metal puddy knife under them to lift them up... :cry: If you remove them yourself with a plastic puddy knife and some goof-off you'll save your chrome....

-Eli


Will a heat gun aid in the careful removal of old wheel weights:?:

Course I may melt the plastic putty knife while doing it!

Thanks again!

Brian:mrgreen:

[halicat]

You're so welcome! Don't forget those photos.... :tu:

DON'T FORGET TO TAKE IS SOMEWHERE WHERE THEY MOUNT THE WHEELS WITH OUTSIDE CLAMPS so you don't damage the inside of the wheels.

-Eli



Jim, Don't worry about it, just take care of yourself first. When you are ready I'll send the funds to complete the transaction

Hope you get well soon. :beer:

-Eli

Eli,

I went to the tire shop today to get the tires taken off the wheels and they were booked out all day and couldn't get them until Thursday and I'll be away...This will have to wait until I get back next week.. sorry about the delay, thats what I get for being sick...

Jim

[TooHipCat]

Eli,

sorry about the delay, thats what I get for being sick



Shame on you Jim!!!:roll: :lol:

[Dreamcast18]

1. THANKS to 24KinMotion for loaning me his wheels!

2. THANKS to David and Eli for setting up the member discounts!


Here's one of the wheels..not a great shot..but will have to do for now:

http://www.prowltalk.com/gallery/data/500/medium/FastForward_002edit.jpg

We did a quick comparison with the regular OEM wheel and the triple layer coating was pretty obvious....good job Eli! :tu:

The regular tire guy was out...and Eli don't trust the new tire guy with the nicely re-chromed wheels..so he had to get his hands dirty! :devil

http://www.prowltalk.com/gallery/data/500/medium/FastForward_001edit.jpg

Santa Ana winds are crazy today....so can't wash the car to take a pic..will do so tomorrow...stay tuned for pics of wheels on the Prowler!:beer:

[FastForwardWheels]

Will a heat gun aid in the careful removal of old wheel weights:?:

Course I may melt the plastic putty knife while doing it!

Thanks again!

Brian:mrgreen:

Even better Brian, you'll then need some goof-off to make it all clean again... :tu: HOPE YOU DON'T MIND ALL THE FRAG STICKERS I SLAPPED ON YOUR BOXES..... "GLASS-PACK" :rll: Whated to make sure they were safe..... :tu:

-Eli

[FastForwardWheels]

Eli,

I went to the tire shop today to get the tires taken off the wheels and they were booked out all day and couldn't get them until Thursday and I'll be away...This will have to wait until I get back next week.. sorry about the delay, thats what I get for being sick...

Jim

Nothing to worry about sir! You're actually doing everyone a favor on this set, so nothing to worry about! 1) Get Better 2) Get back from your trip 3) Get back to me... :beer:

=Eli

[FastForwardWheels]

1. THANKS to 24KinMotion for loaning me his wheels!

2. THANKS to David and Eli for setting up the member discounts!


The regular tire guy was out...and Eli don't trust the new tire guy with the nicely re-chromed wheels..so he had to get his hands dirty! :devil

http://www.prowltalk.com/gallery/data/500/medium/FastForward_001edit.jpg

Santa Ana winds are crazy today....so can't wash the car to take a pic..will do so tomorrow...stay tuned for pics of wheels on the Prowler!:beer:

Sorry, if I haven't seen someone perform on other wheels then I can't trust the work to my customers. Be-It that I'm not much of a tire guy myself, I can do it, it just takes longer.... With some aid from time to time.... :tu:

I see you captured my better side... :rll:

Can't wait to see the photos,

Thanks again for your understanding while our real tire guy was out.

-Eli

[TooHipCat]

THANKS to David and Eli for setting up the member discounts!


Here's one of the wheels..not a great shot..but will have to do for now:

http://www.prowltalk.com/gallery/data/500/medium/FastForward_002edit.jpg

We did a quick comparison with the regular OEM wheel and the triple layer coating was pretty obvious....good job Eli! :tu:



The rims look GREAT DC!!!:tu:

What you mentioned about the Fast Forward Wheels rims vs. the American Racing...is just what I was afraid of.

This is why I plan on sending out my set of 17" fronts to Eli in the Fall.:tu:

Can't wait to see the final pics DC!

Eli,
So in your professional opinion you feel that American Racing didn't triple plate?
I always thought that the reason that the chrome was flaking off the inside barrel was due to a poor prep job prior to plating.

Brian:mrgreen:

[Dreamcast18]

to the tune of Bee Gee's...


Front Wheel:

http://www.prowltalk.com/gallery/data/500/medium/FastForward_013.jpg


Close up of Front Wheel:

http://www.prowltalk.com/gallery/data/500/medium/FastForward_017.jpg


Interior shot of Front Wheel:

http://www.prowltalk.com/gallery/data/500/medium/FastForward_021.jpg


Close up Interior shot of Front Wheel:

http://www.prowltalk.com/gallery/data/500/medium/FastForward_025.jpg


Close up shot of Rear Wheel:

http://www.prowltalk.com/gallery/data/500/medium/FastForward_025.jpg

[DanMan]

Sweet! :tu: Eli!

[FastForwardWheels]

Love the clean car photos but let's see a whole shot!

-Eli :tu:

[Pepe]

VEEERY NICE ! Looks great ..... one thing I gotta have done SOON !

So HOW MUCH is it again per wheel Eli ?

(don't want to stroll through 12 pages here)

[Krzy Kat]

Pricing is listed on the start of the thread.

[Pepe]

Thanks K.K. ,

yeah, I'ven seen that AFTER I posted yesterday but was wondering anyways what the COST is gonna be since Eli mentioned 'starting at' per wheel on the front page, maybe after having this set done we can get a final quote ?! :tu:

[FastForwardWheels]

Thanks K.K. ,

yeah, I'ven seen that AFTER I posted yesterday but was wondering anyways what the COST is gonna be since Eli mentioned 'starting at' per wheel on the front page, maybe after having this set done we can get a final quote ?! :tu:

Fronts and rears are different in cost but in short, after the DISCOUNT offered to members it comes to an average cost of $250 per wheel. This is in total.... Even if you have some minor curb rash.... :tu:

-Eli

[Pepe]

Thanks Eli ........ that's great !! :tu:

I'll be in touch ...... especially when you get to the point that you got
1 set of wheels ready to be swapped !

[TooHipCat]

Fronts and rears are different in cost but in short, after the DISCOUNT offered to members it comes to an average cost of $250 per wheel. This is in total.... Even if you have some minor curb rash.... :tu:

-Eli

Please correct me if I'm wrong Eli...that price DOES NOT include shipping.

Brian:mrgreen:

[FastForwardWheels]

Please correct me if I'm wrong Eli...that price DOES NOT include shipping.

Brian:mrgreen:


No correction needed, you are correct.... Shipping is something I haven't any control over... :burnout

-Eli

Thanks Eli ........ that's great !! :tu:

I'll be in touch ...... especially when you get to the point that you got
1 set of wheels ready to be swapped !

I have Rich & Coral on this list for the SWAP-OUT program.....

If you'd like PM me your info and I'll put you down as well.

Thanks,

-Eli

[TooHipCat]

I have Rich & Coral on this list for the SWAP-OUT program.....



You guys won't be sorry!:tu:

[TooHipCat]

Brian, Your wheels have shipped...... :tu:



:banana: C'mon Monday!!!:banana:

Ship date
Apr 16, 2007
Estimated delivery
Apr 23, 2007

[TooHipCat]

The FEDEX man just left!

THE RIMS LOOK GREAT ELI!!!:bows

They look 1000 times better than the original plating job.:shock: :tu:

Can't wait to have you do up the fronts for me.

Thanks for the extra business cards.:tu:

[FastForwardWheels]

The FEDEX man just left!

THE RIMS LOOK GREAT ELI!!!:bows

They look 1000 times better than the original plating job.:shock: :tu:

Can't wait to have you do up the fronts for me.

Thanks for the extra business cards.:tu:

SUPER,

Glad to hear that! Hope all the stickers didn't throw you off, it's just that we didn't have the extra thick boxes we like to use available. :tu:

Take some photos on the car, if you can...

-Eli

[TooHipCat]

double post

[TooHipCat]

Take some photos on the car, if you can...



No problem Eli!

Should be able to snap a few next week. Still out straight at work.

May not be able till get the tires mounted till Friday. I will ask to speak to the installer just to make sure we're on the same page.:tu:

Brian:mrgreen:

[FastForwardWheels]

No problem Eli!

Should be able to snap a few next week. Still out straight at work.

May not be able till get the tires mounted till Friday. I will ask to speak to the installer just to make sure we're on the same page.:tu:

Brian:mrgreen:


Looks like we'll be installing a new pair of shoes around the same time. I have a set of Chrome "Black Diamond" I'm putting on the truck right now. They should be finished around Thur, I'm putting a brush finish on the back side for EZ cleaning.... They are 22" Factory SRT-10 wheels on the Dodge Truck..... :tu:

=Eli

[TooHipCat]

Looks like we'll be installing a new pair of shoes around the same time. I have a set of Chrome "Black Diamond" I'm putting on the truck right now. They should be finished around Thur, I'm putting a brush finish on the back side for EZ cleaning.... They are 22" Factory SRT-10 wheels on the Dodge Truck..... :tu:

=Eli

Sounds cool! Don't forget the pics....please.:mrgreen:

[FastForwardWheels]

Sounds cool! Don't forget the pics....please.:mrgreen:

Of course photos will follow..... I just had the tires delivered to me today... 32" tires will raise things up an inch or so... :rolleyes:

Funny how I've now turned my focus to the truck.... Ran out of things to do to the P-car.

-Eli

[halicat]

Eli,

I went to the tire shop today to get the tires taken off the wheels and they were booked out all day and couldn't get them until Thursday and I'll be away...This will have to wait until I get back next week.. sorry about the delay, thats what I get for being sick...

Jim

Hi Eli,

I had the tires removed today and put the two 17" wheels in one box to get a postage rate... this box was $64.00 with a 3 week delivery....$90 delivered in 6 days. The 20" will need to be put in seperate boxes and will probably be around $50 each (3 weeks) $75.00 for 6 day.

bottomline: shipping 3 weeks $164
6 days $240

you may be able to get better rates from UPS or Fedex, my postal code is b0j 1w0.

let me know if you are still interested...

Jim

[halicat]

yes ? ... no ?..... maybe ?

just wondering... I need to sell these right away....

[TooHipCat]

yes ? ... no ?..... maybe ?

just wondering... I need to sell these right away....

I can't speak for Eli...Jim. It did sound like he wanted them.:tu:

If he doesn't reply to you I can give him a call if you'd like. Let me know if you need my help.

Brian;-)

[FastForwardWheels]

I can't speak for Eli...Jim. It did sound like he wanted them.:tu:

If he doesn't reply to you I can give him a call if you'd like. Let me know if you need my help.

Brian;-)

Thanks Brian,

We've just been super swamped this past week.... Two customers (wholesale) had show wheels and needed then "like-yesterday" (around 20-sets).....

Pretty much 95% of everything was put on hold to get these out in-time for the show. You know we'll be playing catch up this coming week... :burnout

PM Sent, we're all good....

-Eli

Thanks Jim,

[halicat]

No Worries Brian...

I am going to send these out to Eli on Monday or Tuesday....

Thank you for the offer of assistance..:tu:

Jimbo

[Pepe]

If he doesn't reply to you I can give him a call if you'd like. Let me know if you need my help.

Brian;-)


Yeah, those Canucks REALLY need to learn to speak English so they can make their own phone calls .................................:rll: ........ Love ya Jimbo :mrgreen:

[halicat]

English .... was ist das ?....:lol:

[TooHipCat]

We've just been super swamped this past week....



You think you had it bad this week...I think it's only going to get worse for you Eli!:shock:

I got my tires mounted today by a place in Tewksbury,MA called Rim Pro (www.rimpro.com (http://www.rimpro.com) ). The technician that carefully mounted my 20" re-chromed pieces of art, commented on how good of a job you did on my rims.:tu: :bows

He told me...quote: "He had never seen a set of Prowler rims look as good as mine. Especially the inside barrels."

I'm letting you know this Eli cuz I think he may be giving you a call. I gave him your web address of www.fastforwardwheels.com (http://www.fastforwardwheels.com)

This company is well known in my area for being the best at what they do. I personally feel that you are going to get a lot of business from this guy.

Brian:mrgreen:

[FastForwardWheels]

You think you had it bad this week...I think it's only going to get worse for you Eli!:shock:

I got my tires mounted today by a place in Tewksbury,MA called Rim Pro (www.rimpro.com (http://www.rimpro.com) ). The technician that carefully mounted my 20" re-chromed pieces of art, commented on how good of a job you did on my rims.:tu: :bows

He told me...quote: "He had never seen a set of Prowler rims look as good as mine. Especially the inside barrels."

I'm letting you know this Eli cuz I think he may be giving you a call. I gave him your web address of www.fastforwardwheels.com (http://www.fastforwardwheels.com)

This company is well known in my area for being the best at what they do. I personally feel that you are going to get a lot of business from this guy.

Brian:mrgreen:

Yes, I've heard of them before.....

Sometimes when you see other's work it's very stand-up to give the thumbs-up. :tu: Glad to hear . . . .

I'd be happy to assist others in the group as I've done before. I've painted wheels for shops who only specialize in Rim Repair. We do it all but hey, I'm not trying to take away anyone's market-share especially when they are using my services...

I'd even be happy to recommend them out if they bring business my way. When customers call from their area, why not.... It's all about networking....

Thanks again,

-Eli

[TooHipCat]

Sometimes when you see other's work it's very stand-up to give the thumbs-up. :tu: Glad to hear . . . .




To be honest with you Eli...I had originally thought about going with Rim Pro when I first thought about re-chroming my rear rims. They sub out their rims for repair...but I'm sure you already knew that.
I honestly DID NOT feel comfortable with the whole situation when their plater...whoever they would have sent my rims to...didn't even want to warranty his work.:roll:

I felt very comfortable after talking with their technician...Jim...that they were going to do a great job mounting my tires. The came out great!!!
I did notice that my front rims are encountering the same fate as my rears...yes they too are starting to flake.

After this cruising season...they are off to "Fast Forward Wheels"!!!:banana:

Thanks again Eli!

Brian:mrgreen:

[Dreamcast18]

Okie, have not had time to take any pics...here's some pics of the newly chromed wheels on the Prowler..not alot of light this evening...might have to wait for tomorrow morning. Eli probably has some better pics.

p.s. Yes, there's no wheels caps :banned

http://www.prowltalk.com/gallery/data/500/medium/ProwlerWheel_009.jpg

http://www.prowltalk.com/gallery/data/500/medium/ProwlerWheel_015.jpg

[TooHipCat]

They look good to me DC!:tu:

Are you going to replace your original center caps or go with something different?:confused:

[halicat]

spinners........I bet....:tu:

[FastForwardWheels]

Okie, have not had time to take any pics...here's some pics of the newly chromed wheels on the Prowler..not alot of light this evening...might have to wait for tomorrow morning. Eli probably has some better pics.

p.s. Yes, there's no wheels caps :banned



Sorry, maybe not better but hey, I was happy to take a "final-product photo" :tu:

Thanks again guys, Thanks again too Brian,.....

-Eli

http://www.pcars.us/albums/9585.jpg

[blackcat]

Best Prowler wheels I've seen. Good job!:tu: :tu: :tu:

[TooHipCat]

Best Prowler wheels I've seen. Good job!


Once again...the pics DO NOT do the final product justice!!!:tu:

My kat rolls out for the first time this Friday night to take my sweetheart of a daughter to her Father/Daughter dance.

I will try and take some pics either on Friday or early Saturday morning.

Eli,
In as far as thanks for me...you are more than welcome my friend!!!:tu:

You're an excelllent guy to do business with. I have only begun to recommend "Fast Forward Wheels" to all of my motorhead friends.

To think...this all started from the the e-mails I received from DC and Skankat telling me all about "Fast Forward Wheels".

Brian:mrgreen:

[TooHipCat]

Eli,
I plan on using a skim coat of Anti-seize on the back surface of my rear rims where they come in contact with the rear rotors.

Will the Anti-seize have any adverse effects on the freshly chromed rims?

My guess is it won't...but I just wanted to be sure.

Thanks!

Brian:mrgreen:

[FastForwardWheels]

Eli,
I plan on using a skim coat of Anti-seize on the back surface of my rear rims where they come in contact with the rear rotors.

Will the Anti-seize have any adverse effects on the freshly chromed rims?

My guess is it won't...but I just wanted to be sure.

Thanks!

Brian:mrgreen:

Brian,

I will be honest with you, I've never been asked this before and so I'd rather tell you "I don't know" than to tell you I have an answer.

I have a set just completed on my truck, I have the black diamond overlay and brush shine in the rear with clear coat for easy cleaning.....

-Eli

http://www.pcars.us/albums/9672.jpg
http://www.pcars.us/albums/9678.jpg
http://www.pcars.us/albums/9677.jpg
http://www.pcars.us/albums/9673.jpg

[FastForwardWheels]

Once again...the pics DO NOT do the final product justice!!!:tu:

My kat rolls out for the first time this Friday night to take my sweetheart of a daughter to her Father/Daughter dance.

I will try and take some pics either on Friday or early Saturday morning.

Eli,
In as far as thanks for me...you are more than welcome my friend!!!:tu:

You're an excelllent guy to do business with. I have only begun to recommend "Fast Forward Wheels" to all of my motorhead friends.

To think...this all started from the the e-mails I received from DC and Skankat telling me all about "Fast Forward Wheels".

Brian:mrgreen:

Thanks again Brian! :tu:

Glad to help you guys out......

-Eli

[FastForwardWheels]

Jim,
We'll see if nobody else needs them. If they don't...I'd buy they off you just as long as they haven't been curbed too many times.:shock: :lol:

I'd like to have a spare set lying around. I could eventually send them to Eli!!!:banana:

Your a good friend Jimbo!

Brian ;-)

Hi there Brian,

You can have them, I was able to pick up an other set. If you'd like you can PayPal Jim for them and he can then refund me the money I sent him. According to Jim they are ready to go.... I was just able to make it work with an other set for less....

Thanks, let me know if we're good with this.... :tu:

-Eli

[TooHipCat]

Hi there Brian,

You can have them, I was able to pick up an other set. If you'd like you can PayPal Jim for them and he can then refund me the money I sent him. According to Jim they are ready to go.... I was just able to make it work with an other set for less....

Thanks, let me know if we're good with this.... :tu:

-Eli

As you know Eli...I never signed up for PayPal.:roll:

Jimbo...PM me and let me know where I can send the money.

Do me a favor and break the cost down once again. Rims...plus shipping to the State of NH.

I don't care how long it takes for them to get here...just as long as they're packaged well.;-)

Brian:mrgreen:

[FastForwardWheels]

As you know Eli...I never signed up for PayPal.:roll:

Jimbo...PM me and let me know where I can send the money.

Do me a favor and break the cost down once again. Rims...plus shipping to the State of NH.

I don't care how long it takes for them to get here...just as long as they're packaged well.;-)

Brian:mrgreen:

How's about Camel. . . :burnout Delivery......

Thanks Brian, I guess Jeff will deposit your funds and be able to refund me the funds I sent so PayPal doesn't get to charge us for those funds %... :tu:

[halicat]

Hi Guys,

Brian, I need your zip code to get a shipping charge. then I can get a cost for you. once we can determine the difference we will get Eli paid.

..:tu:

jim

[TooHipCat]

Hi Guys,

Brian, I need your zip code to get a shipping charge. then I can get a cost for you. once we can determine the difference we will get Eli paid.

..:tu:

jim

03053

[halicat]

i'll report back tomorrow after I get to the post office....:beer:

[FastForwardWheels]

i'll report back tomorrow after I get to the post office....:beer:


Thanks Jim,

-Eli

[TooHipCat]

Jim and Eli...please check your PM's!

[halicat]

got it...

thanks Brian

[TooHipCat]

Jim...please check your PM's!
http://www.prowltalk.com/vbforums/images/misc/progress.gif

[TooHipCat]

Jim and Eli...please check your PM's!

Once again please!:mrgreen:

[Dreamcast18]

Just wanted to let everyone know that I got my rear wheel back from Eli today. He took it back the last time when I noticed some weird scratch on it after giving the car a wash.

He did a full-rechome and it came out show quality as usual.

What can I say? Excellent service from FFW! :tu:

[Pepe]

Anybody knows if Eli is ready to do the 'exchange' program ?

[halicat]

he did buy an exchange set.... I would say he should be ready by now...

[TooHipCat]

What can I say? Excellent service from FFW! :tu:

:bows:bows:bows

[TooHipCat]

Anybody knows if Eli is ready to do the 'exchange' program ?

Just give him a call to be sure Pepe!:tu:

(626) 289-1462

[FastForwardWheels]

Just wanted to let everyone know that I got my rear wheel back from Eli today. He took it back the last time when I noticed some weird scratch on it after giving the car a wash.

He did a full-rechome and it came out show quality as usual.

What can I say? Excellent service from FFW! :tu:

THANKS for the warm words....

I was about to purchase a set from someone who was giving me a deal but then backed out..... :( I just got the opportunity to get a different set, so I'm now looking into it....

-Eli

[halicat]

I snagged this off another site and since it pertains to chroming of wheels, i thought I would ask the expert.....

question: Does this quote make any sense ?

"were not talking harleys here bro.the fact that you have wheels chromed all the time doesn't mean squat.take your chromer a chrome prowler wheel w pits on the inner barrel.he will tell you he cant get rid of the pits unless he machines out the pits,depending on how bad they are.the shape of the inner barrel where it meets the center of the wheel is near impossible to machine.i should have been more specific most people with prowler chrome wheels with pitts want them rechromed to get rid of the pitts.if you have chrome wheels w/o pitts then they can be rechromed.price what i quoted is for 4 wheels not 2 and there is no exchange needed,600.00 plus 2 wheels who's absurd now."

[Pepe]

.......... and I'm wondering if Eli is ready for an 'exchange' of 2 front rims :tu:

[IN-XTC]

Eli ... Can you do a lime green color to your chrome cause I have heard that can be done
Thanks and how much for 4 Prowler rims

[FastForwardWheels]

I snagged this off another site and since it pertains to chroming of wheels, i thought I would ask the expert.....

question: Does this quote make any sense ?

"were not talking harleys here bro.the fact that you have wheels chromed all the time doesn't mean squat.take your chromer a chrome prowler wheel w pits on the inner barrel.he will tell you he cant get rid of the pits unless he machines out the pits,depending on how bad they are.the shape of the inner barrel where it meets the center of the wheel is near impossible to machine.i should have been more specific most people with prowler chrome wheels with pitts want them rechromed to get rid of the pitts.if you have chrome wheels w/o pitts then they can be rechromed.price what i quoted is for 4 wheels not 2 and there is no exchange needed,600.00 plus 2 wheels who's absurd now."

Well, I hope what I say here makes sense.....

Pits are like cancer, once they are there it is difficult to remove and the difficulty will be in how deep the cancer has dug in. Yes, it's true you can machine the wheels down if the cancer hasn't gone too deep. An alternate method is adding metal to fill in the pits but that can prove to be expensive since pits come in groups "usually".

Most of the pitted wheels I see come from the East Coast where salted roads are the norm. We have sealed chrome wheels for some of our customers who have expressed concerns since they used there wheels in winter driving conditions. Sealing a wheel does keep the harms of the chrome away but it is only a sealer which means it still needs to be treated as a regular painted wheel. You should water down your wheels each day in winter driving conditions where salts are used.

If I missed something please let me know.....

Happy Driving!

-Eli

[FastForwardWheels]

Eli ... Can you do a lime green color to your chrome cause I have heard that can be done
Thanks and how much for 4 Prowler rims

We've had success in Diamond Coating which is a color process used to "color-chrome" if you would. :eek2:

We've done Black, Red, Yellow, Blue, Green, Orange and a few custom in-between colors. Regarding pricing, if your wheels are in excellent condition then you're looking at $150 per wheel, now if you need new chrome then add $100 ea. on top of the regular prices I've given to you guys..... :tu:

-Eli

[Dreamcast18]

I have seen the black chrome on Eli's Porsche...impressive. Was very tempted to black chrome the Prowler spokes...but I like pure chrome too much. I think it will look good on a Black Prowler...maybe Pepe should do it when he re-chrome his rims? :wink:

BTW: I think the original Prowler chrome is so thin and prone to peeling/pitting; that anyone doing the color chrome should just have Eli strip the original chrome and put on some nice show-chrome :tu:

We've had success in Diamond Coating which is a color process used to "color-chrome" if you would. :eek2:

We've done Black, Red, Yellow, Blue, Green, Orange and a few custom in-between colors. Regarding pricing, if your wheels are in excellent condition then you're looking at $150 per wheel, now if you need new chrome then add $100 ea. on top of the regular prices I've given to you guys..... :tu:

-Eli

[TooHipCat]

BTW: I think the original Prowler chrome is so thin and prone to peeling/pitting; that anyone doing the color chrome should just have Eli strip the original chrome and put on some nice show-chrome :tu:


I couldn't agree more!!!

Thanks again guys for hooking me up with Fast Forward Wheels!:tu::bows

[halicat]

Thanks for the explanation Eli...:tu:

[Pepe]

Eli,

would you be ready to an 'exchange' program ?

[Krzy Kat]

Eli - you are a wealth of information and your answers and efforts are appreciated. That being said, a quick question ...

For those of us that haven't encountered the pitting / peeling rims (mine is a 2002 if that matters) - should we get with you when/if they start to peel, or should we think about preventative maintenance and have you redo them even with no current wear and tear?

[FastForwardWheels]

Eli - you are a wealth of information and your answers and efforts are appreciated. That being said, a quick question ...

For those of us that haven't encountered the pitting / peeling rims (mine is a 2002 if that matters) - should we get with you when/if they start to peel, or should we think about preventative maintenance and have you redo them even with no current wear and tear?


Hi there, I just returned from SEMA just minutes ago and so here we go....

To answer your question, the best thing I could recommend would be a sealer... But if you have had your wheels for a while sealing the wheel might not keep it safe if there is a chance they have split or started.

I've done quite a few seal jobs for those living back East..... Most of those who have had pitting before don't want it again.... Yes, we've sealed over chrome wheel, you just need to treat your wheels as you would painted since the seal is the same as we do when we paint and bake.....

Let me know if you have any other questions I could help answer....

PS. I have tons of photos from SEMA which I'll be posting very soon..... I'll draw a link directly so you can view the shots!!! If you don't hear from me within a week please contact me so I can draw a directly link from the FFW site.... :)

Take care all....

-Eli

[kat hunter]

Hi there, I just returned from SEMA just minutes ago and so here we go....

To answer your question, the best thing I could recommend would be a sealer... But if you have had your wheels for a while sealing the wheel might not keep it safe if there is a chance they have split or started.

I've done quite a few seal jobs for those living back East..... Most of those who have had pitting before don't want it again.... Yes, we've sealed over chrome wheel, you just need to treat your wheels as you would painted since the seal is the same as we do when we paint and bake.....

Let me know if you have any other questions I could help answer....

PS. I have tons of photos from SEMA which I'll be posting very soon..... I'll draw a link directly so you can view the shots!!! If you don't hear from me within a week please contact me so I can draw a directly link from the FFW site.... :)

Take care all....

-Eli

I may have a set of wheels headed your way shortly, should have a set today. just need to inspect and decide when to ship. Thanks for offering the discounts to board members.

[Dreamcast18]

Are you gonna do Orange chrome? :wink:



I may have a set of wheels headed your way shortly, should have a set today. just need to inspect and decide when to ship. Thanks for offering the discounts to board members.

[Pepe]

Eli,

sorry to be a pest but do you have an exchange set (or individ. wheels)

I would hate to have the Kat jacked up for weeks/months :-?

THANKS for letting me know !

[halicat]

lol......D-man is being patient...

if he doesn't get an answer he's going to spray......


:eek::eek::eek:

Eli,

sorry to be a pest but do you have an exchange set (or individ. wheels)

I would hate to have the Kat jacked up for weeks/months :-?

THANKS for letting me know !

[Dreamcast18]

Fastest way to get him:
(626) 289-1462

Last I heard he's working on a couple sets of Prowler wheels..



Eli,

sorry to be a pest but do you have an exchange set (or individ. wheels)

I would hate to have the Kat jacked up for weeks/months :-?

THANKS for letting me know !

[kat hunter]

Are you gonna do Orange chrome? :wink:

Might look good, but thats a little much for my tastes.

[Pepe]

Fastest way to get him:
(626) 289-1462

Last I heard he's working on a couple sets of Prowler wheels..

Thanks C-man :tu: I'll might have to call him after all, that pesky time difference just
messes me up LOL :biggrin:

[TooHipCat]

I may have a set of wheels headed your way shortly, should have a set today. just need to inspect and decide when to ship. Thanks for offering the discounts to board members.


You won't be sorry Brian!:tu:

[TooHipCat]

Eli,

sorry to be a pest but do you have an exchange set (or individ. wheels)

I would hate to have the Kat jacked up for weeks/months :-?

THANKS for letting me know !

I feel your pain Pepe!:icon_sad:

Well worth the wait my friend!:tu:

http://i125.photobucket.com/albums/p59/TooHipCat/Kattornapart4-10-07.jpg

[Dreamcast18]

Do I see a possibility of new side panels?!! :wink:



http://i125.photobucket.com/albums/p59/TooHipCat/Kattornapart4-10-07.jpg

[FastForwardWheels]

Hey again guys....

Sorry, I don't have a set for exchange as I was heading for a while back.

-Eli

[24kinmotion]

I do have a set of virgin painted wheels and I am only 10 miles from Eli. I can offer it for exchange program ay cost to benifit PT members only.



















pt

[FastForwardWheels]

I do have a set of virgin painted wheels and I am only 10 miles from Eli. I can offer it for exchange program ay cost to benifit PT members only.
pt

I've seen your car many times off of Valley... :) I can always stop by and pick-up the set at work to make it easy on you too.....

-Eli

[1buddyc]

I've seen your car many times off of Valley... :) I can always stop by and pick-up the set at work to make it easy on you too.....

-Eli

Sherman, how much would you need for the Wheels? I'm interested in getting a set rechromed for my Prowler but I believe all my Wheels are too crappy to send in to exchnge. Let me know what you would take for yours and I'll see if Eli could chrome them for me.. Just PMed you too.
Thanks, Buddy.

[TooHipCat]

I'm interested in getting a set rechromed for my Prowler but I believe all my Wheels are too crappy to send in to exchnge.

I don't know Buddy...check out Eli's website. He definitely is a perfectionist!!!:tu::bows

The set of rears I sent him were real rough...and now they're flawless.:tu:


Do I see a possibility of new side panels?!! :wink:

Nah...I had them off DC cuz I had several items out for paint and it's so much easier to detail when those side panels are off.:wink:

[kat hunter]

Eli,

sorry to be a pest but do you have an exchange set (or individ. wheels)

I would hate to have the Kat jacked up for weeks/months :-?

THANKS for letting me know !

How bad are wheels Dusti?

[FastForwardWheels]

Well,

I should be picking up a set of wheels so I can offer out an exchange program for you guys.... I will meet with one of you guys in about 4-hours to see if we can swing it.... :)

-Eli

[kat hunter]

Anything you need from me before I send a set of wheels your way.

I'll have a complete set of 4 that I want Custom triple plated with the front and rear finishing.

Brian

[TooHipCat]

Anything you need from me before I send a set of wheels your way.

I'll have a complete set of 4 that I want Custom triple plated with the front and rear finishing.

Brian

I'd give him a call Brian to give him a heads up. Don't forget to mention that you want the inside barrels of both sets to be of "Show Chrome" quality.

I believe that's what you meant by your statement above.:biggrin:

[FastForwardWheels]

Anything you need from me before I send a set of wheels your way.

I'll have a complete set of 4 that I want Custom triple plated with the front and rear finishing.

Brian


PM sent....

Thanks!

-Eli

[FastForwardWheels]

Here we've used our lovely model to help you make your choice.... :)

ALL PHOTOS HERE: http://www.prowltalk.com/vbforums/showthread.php?p=64608#post64608

http://i134.photobucket.com/albums/q110/FastForwardWheels/calipers/Prowlerlogos015-800.jpg

[spoons]

Eli,

What a great deal. How long will this deal last? Until the end of July 2008?

[FastForwardWheels]

Eli,

What a great deal. How long will this deal last? Until the end of July 2008?

Current offerings are as such...

$999 on a set of Prowlers front and back finishing (no shipping included if needed), cc. payments will carry a 5% charge. $300.00 savings from anything offered on this thread!!!! :eek2:

Brake calipers are all at $399 the set of four Black, Red, Silver, Yellow, White, Gun Metal are all colors available. Custom colors will reflect a $99 charge for custom colors. All decals included including CHROME at no additional cost.....

-Eli

[attyedhall]

whoa, that is a great price. Soooooooo Eli, i wont be back in florida till early september. what can we do to get my calipers done?????????? Do you have a donor set? (at the current price of course :mrgreen:)....

[DavidN]

Current offerings are as such...

$999 on a set of Prowlers front and back finishing (no shipping included if needed), cc. payments will carry a 5% charge. $300.00 savings from anything offered on this thread!!!! :eek2:

Brake calipers are all at $399 the set of four Black, Red, Silver, Yellow, White, Gun Metal are all colors available. Custom colors will reflect a $99 charge for custom colors. All decals included including CHROME at no additional cost.....

-Eli

Also keep in mind Must have 50 or more posts....:tu::tu:

[FastForwardWheels]

whoa, that is a great price. Soooooooo Eli, i wont be back in florida till early september. what can we do to get my calipers done?????????? Do you have a donor set? (at the current price of course :mrgreen:)....


I opened the flood gates on both sides chrome and paint recently and offered sets as low as $399 for Summer promotions on painted wheel sets. I've gotten a pretty good response so I'll hold on for as long as I can keep up with the work.

I'll keep the doors open for you till you return...

-Eli

[Jim S]

Ed, I have a spare set of calipers. I put Willwood's on my cat. If you want to borrow them, let me know. I can take them to Eli and drop them off for you when I pull my rims off for him to rechrome. Just send me yours when you swap them out.

[attyedhall]

I opened the flood gates on both sides chrome and paint recently and offered sets as low as $399 for Summer promotions on painted wheel sets. I've gotten a pretty good response so I'll hold on for as long as I can keep up with the work.

I'll keep the doors open for you till you return...

-Eli


you are "da man"!:mrgreen::mrgreen::mrgreen::mrgreen:

[1buddyc]

:tu::tu::tu: I'm telling you, those California Prowler Guys are something else!. You all would Not Believe the favors DC and Jim S have done for me... its almost like I live in California! Thanks again Guys!!

[kat hunter]

Current offerings are as such...

$999 on a set of Prowlers front and back finishing (no shipping included if needed), cc. payments will carry a 5% charge. $300.00 savings from anything offered on this thread!!!! :eek2:

Brake calipers are all at $399 the set of four Black, Red, Silver, Yellow, White, Gun Metal are all colors available. Custom colors will reflect a $99 charge for custom colors. All decals included including CHROME at no additional cost.....

-Eli


WOW, great price!!!!

Had mine done to early.:cry2::cry2::cry2:

You can't beat his quality,

Now I need the calipers done.

[FastForwardWheels]

WOW, great price!!!!

Had mine done to early.:cry2::cry2::cry2:

You can't beat his quality,

Now I need the calipers done.


Sorry buddy, in efforts to bump up the amount of work we're taking in we put up a Summer promo, trust me, it's really working..... Everyday has been busy since we've put up the promo. We haven't dropped to these promo rate lows in more than two years.

Not sure how long I'll keep it but it's certain to keep us busy though the Summer... :eek:

-Eli

[kat hunter]

Sorry buddy, in efforts to bump up the amount of work we're taking in we put up a Summer promo, trust me, it's really working..... Everyday has been busy since we've put up the promo. We haven't dropped to these promo rate lows in more than two years.

Not sure how long I'll keep it but it's certain to keep us busy though the Summer... :eek:

-Eli

Not a problem Eli, you roll the dice sometimes, you win sometimes you lose.

In this economy, if you can keep the shop busy your ahead of most.

[FastForwardWheels]

Not a problem Eli, you roll the dice sometimes, you win sometimes you lose.

In this economy, if you can keep the shop busy your ahead of most.


Funny thing is I haven't done any more ads than just a couple of forum post, not internet ads but it is working... :)

By the way I've pointed a few this way to take advanage of the offer!!! ProwlTalk Customer offers right now. . . .


Happy to be of service..

-Eli

[halicat]

Hi Eli,

I sent you a pm

Thanks

Jim

[TooHipCat]

Hi Eli,

I sent you a pm

Thanks

Jim

Copy and paste your message and send it to his e-mail too!

He always responds to me much faster when I use his e-mail.

[halicat]

Copy and paste your message and send it to his e-mail too!

He always responds to me much faster when I use his e-mail.


will do.... Thanks my friend for the tip...:beer:

[TooHipCat]

will do.... Thanks my friend for the tip...:beer:

eli@fastforwardwheels.com