Shifter Cover question

[Ghostrider]

Hey guy's need a little help here, I ordered an owners manual and it hasn't come in yet, but my boot or cover over the parking brake both the little pegs that hold it down in the back are gone and the boot is showing the two little holes, it's pretty ugly.

Got any suggestions or help??

Thanks!

GR

[ME & MY KITTY]

I had the same problem so i used 2 sided sticky tape and used some black plugs and pushed them into the holes found them at an auto parts store hopefully i'm talking about the same problem i had.:tu:

[AC-INXS]

You don't if all possible want to order a new boot cover. The dealer wanted to charge me $167 + labor for one which had the same problem.

I agrued that it was part of the emissions control function, since fumes under the car could come into the driver's area, and I could suffer harm.

After 20 minutes of waiting for them to respond,,,,,,they installed it 'no charge'.

[Ghostrider]

You don't if all possible want to order a new boot cover. The dealer wanted to charge me $167 + labor for one which had the same problem.

I agrued that it was part of the emissions control function, since fumes under the car could come into the driver's area, and I could suffer harm.

After 20 minutes of waiting for them to respond,,,,,,they installed it 'no charge'.
Wow Cool!

GR

[Ghostrider]

I had the same problem so i used 2 sided sticky tape and used some black plugs and pushed them into the holes found them at an auto parts store hopefully i'm talking about the same problem i had.:tu:
Good idea, as mine has the plugs broken off, so I'd have to drill the holes again and put some kind of plug under there, this may work!

Thanks!

GR